Roland SJ-645EX - Manual (Page 59)

57 Chapter 4: A Wide Variety of Operations
4-3 Setting the Location Where Printing Starts
Specifying a Location in the Feed Direction
Use the [ ] [ ] keys to move the media to the location where you want to start printing.
In the figure, the next printing operation starts from the location shown.
Knife guide
Print-start line
The next printing operation starts here.
For roll media, when the media has been returned toward the back of the unit with the [ ] key, manually roll the media back
onto the roll so that all of the media at the back of the unit is stretched taut.
Front edge of the media
Whenever possible, avoid using the [ ] key to pull back the media. Otherwise the following may occur.
• The pinch rollers may pass over the printed surface and smudge the ink.
• The grit rollers may leave tracks on the media, reducing printing accuracy.
• Printing may sag.