Roland SJ-645EX - Manual (Page 71)

69 Chapter 4: A Wide Variety of Operations
4-9 Changing the Type of Ink
When changing the type of ink in use, follow the steps below to replace the ink.
Ink replacement requires four SOL INK cleaning cartridges. You can change the type of ink three times per four cleaning
cartridges.
1 Press the [MENU] key, and press the [ ] key
to make the following screen appear on the dis-
play.
2 Press the [ ] key to make the following screen
appear on the display.
3 Use the [ ] key to select [CHANGE INK SET],
then press the [
] key.
4 Use the [ ] and [ ] keys to select the new
type of ink to use, then press the [ENTER] key.
ECO-SOL CMYKMC
= Four colors (cyan/magenta/yellow/black)
ECO-SOL LcLm
= Six colors (cyan/magenta/yellow/black/light cyan/light magenta)
5 When the display shown in the figure appears,
empty the drain bottle and press the [ENTER]
key.
MENU
INK CONTROL
INK CONTROL
EMPTY MODE
INK CONTROL
CHANGE INK SET
Be sure to discard the discharged ink.
Attempting to replace the ink while discharged ink
remains may cause discharged ink to overflow from
the bottle.
EMPTY
DRAIN BOTTLE
CHANGE INK SET
ECO-SOL CMYKMC