Roland SJ-645EX - Manual (Page 72)

70 Chapter 4: A Wide Variety of Operations
4-9 Changing the Type of Ink
6 Pull out the ink cartridges indicated by the flash-
ing number.
Replacement of ink starts.
7 Follow the on-screen instructions to insert and
remove the cleaning cartridges.
8 When the display shown in the figure appears,
empty the drain bottle and press the [ENTER]
key.
9 Gently shake the new cartridge.
10 When the display shown in the figure appears,
insert the ink cartridge to be newly used.
11 When the display shown in the figure appears,
ink replacement is finished.
Press the [SETUP] key to go back to the top
menu.
EMPTY
DRAIN BOTTLE
Be sure to discard the discharged ink. Attempting
to replace the ink while discharged ink remains may
cause discharged ink to overflow from the bottle.
For more information about how to dispose of dis-
charged ink, see "5-5 Disposing of Discharged Ink."
REMOVE SOL CRT.
1 2 3 4 5 6 7 8 9 10 11 12
SET SOL CRT.
1 2 3 4 5 6 7 8 9 10 11 12
CHANGE INK SET
ECO-SOL CMYKMC
Insert the cleaning cartridge indi-
cated by the flashing number.
Remove the cleaning cartridge
indicated by the flashing number.