Removing punch and staple waste, Finisher, See p.108 “removing punch and staple waste – Ricoh feeder User Manual
Page 114: 6removing punch and staple waste
Advertising
Clearing Misfeeds
108
6
Removing Punch and Staple Waste
This section explains how to remove punch and staple waste.
Note
❒ While “
Hole Punch Receptacle is full.
” or “
Waste Staple Recepta-
cle is full.
” is displayed, you cannot use the Punch function or the Staple
function.
Finisher
The following procedure explains how to remove punch and staple wastes from
the Finisher.
• Remove punch wastes
• Remove staple wastes
Note
❒ If the message is still displayed, reinstall the waste box.
ANR025
ANR024
Advertising