Ricoh feeder - Manual (Page 76)

Adding paper, Toner and Staples
70
5
Loading Paper into the Wide Large Capacity Tray (Wide LCT)
The following procedure explains loading paper into the wide large capacity
tray (Wide LCT). The Wide LCT is identified as Tray 4, Tray 5, and Tray 6.
Important
❒ Various sizes of paper can be loaded in the Wide LCT by adjusting the posi-
tions of side fence and end fence.
❒ Check that the paper edges are aligned at the left side.
❒ Do not load paper above the upper mark in the paper tray
A
Carefully pull out the paper tray until it stops.
B
Load paper into the paper tray by pushing the paper to the left side of the
paper tray.
Place paper with printing side up.
C
Carefully slide the paper tray fully in.
Note
❒ The tray can hold up to 1,100 sheets in Tray 4 and 6, and 2,200 sheets in Tray 5.
❒ If you load paper that cannot be automatically detected, specify its size us-
ing the control panel.
Reference
p.75 “Changing the Paper Size”
p.84 “Changing to a Size that is Not Automatically Detected”
ANQ060S
ANQ065S