Ricoh feeder - Manual (Page 61)

When a Message is Displayed
55
4
Exceeded max.
number of files
which can be sent
at the same time.
Reduce the number
of the selected
files.
The number of files ex-
ceeded the maximum
number possible. Reduce the number of files and send
them again.
Cannot detect
original size.
Place original
again, then press
the Start key.
You have loaded paper of
a size not shown on the
paper size selector. • Place the original correctly.
• Specify the scan size.
• When placing an original directly
on the exposure glass, the lifting/
lowering action of the ADF triggers
the automatic original size detection
process. Lift the ADF by more than
30 degrees. See “Placing Originals”,
Copy/Document Server Reference.
Exceeded max. No.
of results to
display. Max.:
Search results have ex-
ceeded the max. display-
able number. Search again after changing the search
conditions.
You do not have
the privileges to
use this function.
The machine has not been
set to allow you to use the
function. Contact the administrator.
Exceeded max.
number of standby
files.Try again
after the current
file is sent.
The maximum number of
standby files was exceed-
ed. There are 100 files waiting in the send-
ing queue for e-mail, Scan to Folder, or
delivery functions. Wait until files have
been sent.
Exceeded time
limit for LDAP
server search.
Check the server
status.
A network error has oc-
curred and connection
has failed. Try the operation once more. If the mes-
sage is still shown, the network may be
crowded. Check the information of Sys-
tem Settings. See “System Settings”,
General Settings Guide.
The specified group
contains some des-
tination(s) that do
not have access
privileges. Do you
want to select only
the privileged des-
tination(s)?
The specified group con-
tains some destinations
for sending by e-mail
and some destinations
for sending by Scan to
Folder. To select destinations for sending by e-
mail, press [Select] for the message dis-
played on the e-mail screen. To select
destination for sending by Scan to Fold-
er, press [Select] for the message dis-
played on the Scan to Folder screen.
Message Cause Solution