Ricoh feeder User Manual
Page 50
Troubleshooting When Using the Printer Function
44
3
❖ When the machine is connected to the computer using the interface cable
The following shows how to check the print port when the data-in lamp does
not light up or blink.
Check if the print port setting is correct. When it is connected using a parallel
interface, connect it to LPT1 or LPT2.
For Windows 95/98/Me
A
Click the [Start] button, point to [Settings], and then click [Printers].
B
Click the icon of the machine. On the [File] menu, click [Properties].
C
Click the [Details] tab.
D
In the [Print to the following port:] list, confirm the correct port is selected.
For Windows 2000 or Windows NT 4.0
A
Click the [Start] button, point to [Settings], and then click [Printers].
B
Click the icon of the machine. On the [File] menu, click [Properties].
C
Click the [Ports] tab.
D
In the [Print to the following port(s)] list, confirm the correct port is selected.
Windows XP
A
Click the [Start] button, and then click [Printers and Faxes].
B
Click the icon of the machine. On the [File] menu, click [Properties].
C
Click the [Ports] tab.
D
In the [Print to the following port(s)] list, confirm the correct port is selected.
Windows Server 2003
A
Click the [Start] button, point to [Settings], and then click [Printers and Faxes].
B
Click the icon of the machine. On the [File] menu, click [Properties].
C
Click the [Ports] tab.
D
In the [Print to the following port(s)] list, confirm the correct port is selected.