When a job is not performed, 1when a job is not performed – Ricoh feeder User Manual
Page 20
When the Machine Does Not Operate As wanted
14
1
When a Job is Not Performed
If you cannot execute a function, it may be that the machine is being held up by
another function.
If you cannot execute a function, terminate any other functions currently active,
and then try executing the function again. In certain cases, you can carry out an-
other job (copier, document server, printer, scanner) without canceling the cur-
rent job being performed. Performing multiple functions simultaneously like
this is called “Multi-accessing”.
Combination Chart
❖ Function Compatibility
The chart shows Function Compatibility when print priority is set to “Inter-
leave”. See “Print Priority”, General Settings Guide.
: Simultaneous operations are possible.
: Operation is enabled when the relevant function key is pressed and re-
mote switching (of the scanner/external extension) is done.
: Operation is enabled when the {Interrupt} key is pressed to interrupt the
preceding operation.
→ : Operation is performed automatically once the preceding operation ends.
× : The operation must be started once the preceding operation ends. (Simul-
taneous operations are not possible.)