when the machine does not operate as wanted, Indicators, When the machine does not operate as wanted – Ricoh feeder User Manual
Page 9
3
1. When the Machine Does
Not Operate As wanted
This chapter explains basic troubleshooting procedures that are applicable to all
functions of this machine.
Indicators
This section explains Indicators displayed when the machine requires the user
to remove misfed paper, add paper, or other perform other procedures.
x: Misfeed indicator
Appears when a misfeed occurs.
See p.93 “Removing Jammed Paper”.
B: Add Paper indicator
Appears when paper-out condition occurs.
See p.65 “Loading paper”.
D: Add Toner indicator
Appears when toner runs out.
See p.87 “Adding Toner”.
d: Add Staple indicator
Appears when staples run out.
See p.90 “Adding Staples”.
y: Empty Hole Punch Receptacle
indicator
Appears when the hole punch receptacle is full.
See p.108 “Removing Punch and Staple Waste”
0: Empty Waste Staple Receptacle
indicator
Appears when the waste staple receptacle is full.
See p.108 “Removing Punch and Staple Waste”
L: Service Call indicator
Appears when the machine is mulfuncitoning, or needs
repairing.
M: Open Cover indicator
Appears when the front cover, etc, is open.