Roland FP-2 - Manual (Page 17)

17
Chapter 1 Playing the Keyboard
■ Changing Tone Group and Tone Variation.
Changing the Upper Tone
1.
Press the Tone button to choose a Tone Group.
2.
Press the [-] or [+] buttons to select the Tones.
Changing the Lower Tone
1.
Hold down the [Split] button and press the Tone button to
choose a Tone Group.
2.
Hold down the [Split] button and press the [-] or [+] buttons
to select a Tones.
For more on selecting tones, refer to “Performing with a Variety of Sounds”
(p. 14).
When the tone of the same
Tone button is selected for
both the Upper and Lower
Tones, the indicator for
Tone button flash in green
while the [Split] button is
held down.
Press
While holding down... Press
You can change the pitch of
the Lower Tone an octave at
a time. Refer to “Changing
the Pitch of the Lower Tone
in Octave Steps (Octave
Shift)” (p. 41).
FP-2_e.book 17 ページ ２００４年１１月２６日 金曜日 午後４時２５分