Roland FP-2 - Manual (Page 26)

26
Chapter 1 Playing the Keyboard
Boosting the Low-Frequency Range
(Sound Control)
Switching on the Sound Control function suppresses differences in volume
for a more consistent sound.
This is set to ON when the power is turned on.
1.
Press the [Sound Control] button, getting its indicator to
light.
2.
While holding down the [Sound Control] button, press the
[-] or [+] button to change the type.
3.
To remove this function, press the [Sound Control] button
once more, extinguishing the indicator.
Changing the Tonal Quality (Equalizer)
You can use the equalizer to adjust the tonal quality.
1.
Press the [Equalizer] button.
The indicators for the [Equalizer] button lights in green, and the tonal
quality is changed.
2.
To remove this function, press the [Equalizer] button once
more, extinguishing the indicator
Display Description
1
Gives a consistent, well-balanced sound from the low- to
the high-frequency ranges.
2 This further boosts the high-frequency range.
3 This type particularly boosts the bass range.
1,3 2
1 is selected when the
power is turned on.
NOTE
Sounds may become
distorted with certain tones.
NOTE
The Sound Control and
equalizer functions are not
applied to the sounds of
external devices connected
to the Line In jacks and the
MIDI connectors.
1,2
You can make more
exacting changes to the
equalizer settings. Refer to
p. 44.
FP-2_e.book 26 ページ ２００４年１１月２６日 金曜日 午後４時２５分