Recording selected track buttons – Roland FP-2 User Manual

Page 36

Advertising
background image

36

Chapter 3 Recording a Performance

Recording Selected Track buttons

FP-2’s Recorder has three Track buttons.
When you press the [Rec] button, all Track buttons are set to be recorded,
but by selecting Track buttons that are not to be recorded, you can then
record only on the specific Track buttons you want.
For example, you can record each hand’s performance to different Track
buttons, or record over only certain Track buttons in a previously recorded
performance.

fig.03-03

1.

While holding down the [Rec] button, and turn off the

indicator light for the Track button, whether the [Start/Stop],
[Part], or [Chord Progression] button, for any track not to be
recorded.

The [Rec] button’s indicator lights up, the [Play/Stop] button’s indicator
flashes, and the FP-2 is put into recording standby.

2.

With the FP-2 in standby, go on to record the performance

according to the procedures as described in “Recording a
Performance” (p. 34), “Recording a Performance Using
Session Partner” (p. 35), starting from Step 3.

The performance is not recorded only to the Track buttons whose indicator
was turned off.

Recording along with internal songs

You can also record your own performance as you play along with the
internal piano songs.
When recording to specific Track buttons, the sounds on the selected Track
buttons are not played. For example, you can record what you are playing
with your right hand as you listen to the left-hand part.

1.

With the [Display], [-] and [+] buttons select the song.

2.

Hold down the [Rec] button and turn off the indicator light
for the track button of the track you intend not to play
yourself.

The [Rec] button’s indicator lights up, the [Play/Stop] button’s indicator
flashes, and the FP-2 is put into recording standby.

3.

Press the [Play/Stop] button to start recording.

4.

Press the [Rec] or [Play/Stop] button to stop recording.

While holding down...

Press

About the Lighting of
Track Button Indicators
when the [Rec] button is
pressed, track button
indicate the status of
recording, as shown below.

Dark

Flash in red

Not Recording

Recording

Correspondence
Between Internal Piano
Song Track Buttons
and Performance

[1] button: left-hand Part
[2] button: right-hand Part
No performance data is
assigned to the [R] button.

FP-2_e.book 36 ページ 2004年11月26日 金曜日 午後4時25分

Advertising