Roland FP-2 - Manual (Page 37)

37
Chapter 3 Recording a Performance
Erasing Recorded Performances
You can erase recorded performances.
fig.03-04
1.
Hold down the [Display] button and press the [Rec] button.
A confirmation message appears in the display.
fig.03-05
2.
Press the [Rec] button.
The recorded performance is erased.
If you do not want to erase the performance, press the [Play/Stop] or
[Display] button.
1 2
flash
Correspondence Between Recorded Performance and
Track Buttons
A recorded performance will be assigned to the Track buttons as follows.
* You can also record to the [1] button regular keyboard performances in which
only the [1] button is specified.
Track button Performance recorded
[R]
• Session Partner (p. 27)
• A performance of drum set tones
[1]
• Lower Tone in Dual play or Split play (p. 15, p. 16)
(except drum set tones)
[2]
• The performance of the entire keyboard (except drum
set tones)
• Upper Tone in Dual play or Split play (p. 15, p. 16)
(except drum set tones)
FP-2_e.book 37 ページ ２００４年１１月２６日 金曜日 午後４時２５分