Roland FP-2 - Manual (Page 18)

18
Chapter 1 Playing the Keyboard
■ Changing the Keyboard’s Split Point
You can change the location where the keyboard is divided (the split point)
within the range of B1 through B6.
This is set to “F 3” when the instrument is turned on.
This setting remains in effect until you turn off the power.
fig.01-14
1.
Hold down the [Split] button and press a key set as the split
point.
The key you pressed becomes the split point, and appears in the display.
The key being used as the split point belongs to the left-hand section of the
keyboard.
When you release the [Split] button, you return to the previous screen.
Changing the Volume Balance for Dual
Play and Split Play
You can change the volume balance of the Upper and Lower Tones in Dual
Play (p. 15) and Split Play (p. 16).
fig.01-15
1.
Use the [Balance] knob to adjust the volume balance.
F 3
B1 B6
The name of the key acting
as the split point is
indicated in the display, as
shown below.
Display
Letter
name
Display
Letter
name
Display
Letter
name
C d_ d E_
C D D E
E F F G
E F F G
A_ A b_ b
A A B B
FP-2_e.book 18 ページ ２００４年１１月２６日 金曜日 午後４時２５分