Ricoh Type 480 - Manual (Page 23)

Specifying How to Start Scanning
15
1
Specifying How to Start Scanning
There are two ways to start scanning:
• Placing originals
• Pressing the
{{{{Start}}}} key.
Using the default setting, you can start scanning, storing, and delivering files
simply by loading them (without pressing the
{{{{Start}}}} key). When you do this,
the
{{{{Start}}}} key does not light. However, in the following situations, press the
{{{{Start}}}} key.
• When you print the scanner journal
• Right after you remove misfed paper
• Right after you specify an entry (such as the destination) required for scan-
ning
Note
❒ You can specify that the {{{{Start}}}} key must be pressed to start scanning. For de-
tails about specifying how to start scanning, see “System Settings”, General
Settings Guide.