Ricoh Type 480 - Manual (Page 66)

Delivering Scan Files
58
5
Preparation for Delivering
To use the machine as a network delivery scanner, the preparation described be-
low is required.
Connect the machine to the network with an Ethernet cable or
IEEE 1394 cable, or use wireless LAN.
To connect using an IEEE 1394 cable, the IEEE 1394 interface
board is required. To connect using wireless LAN, the IEEE
802.11b interface unit is required.
See Network Guide.
To deliver scan files, the following [System Settings] settings
must be specified correctly. (Certain other settings must also be
specified.)
• IP address
• subnet mask
Also, [On] must be selected for [Delivery Option] under [File Trans-
fer]
. For details about making settings and other settings, see
Network Guide .
Make settings for the network delivery scanner function, such as
Destination List Settings.
See p.95 “Initial Scanner Setup”.
Install the ScanRouter delivery software required for using the
network delivery scanner functions on the delivery server.
See p.11 “DeskTopBinder”.
After installing the software, make the required settings for
server maintenance and delivery service.
For details, see the ScanRouter delivery software manuals.
Set the destination, sender information, and connected devices
in the ScanRouter delivery software.
On the client computers, install the software required for view-
ing or retrieving files by connecting to the delivery server, such
as DeskTopBinder.
See p.11 “DeskTopBinder”.