Ricoh Type 480 - Manual (Page 93)

If Your Machine Does Not Operate As You Want
85
8
Operations are not possible when messages appear
Problems Causes and solutions
" Updating the des-
tination
list...Please
wait. Specified
destination(s) or
sender's name has
been cleared. ” ap-
pears, and operations are
not possible.
The destination list is being updated from the network using
SmartDeviceMonitor for Admin. Depending on the number of
destinations to be updated, there may be some delay before you
can resume operation. Operations are not possible while this mes-
sage is displayed.
Wait until the message disappears. Do not switch off the power
while this message is displayed.