RoboteQ Dual Channel Digital Motor Controller AX500 - Manual (Page 25)

AX500 Motor Controller User’s Manual 25
Power Connections
SECTION 4
Connecting
Power and
Motors to the
Controller
This section describes the AX500 Controller’s connections to power sources and motors.
Important Warning
Please follow the instructions in this section very carefully. Any problem due to wir-
ing errors may have very serious consequences and will not be covered by the prod-
uct’s warranty.
Power Connections
The AX500 has three Ground, two Vmot terminals and a Vcon terminal. The power termi-
nals are located at the back end of the controller. The various power terminals are identified
by markings on the PCB.The power connections to the batteries and motors are shown in
the figure below.