Ricoh H5676 - Manual (Page 68)

Sending Scan Files by Scan to Folder
60
2
C
Enter the FTP server name, and then press {OK}.
Instead of specifying the destination using its server name, you can also use
its IPv4 address.
D
If you change the port number specified under [System Settings], enter a new
number using the number keys, and then press {OK}.
E
Enter the user name, and then press {OK}.
F
Enter the password, and then press {OK}.
G
Enter the path to the destination folder, and then press {OK}.
The following is an example of a path where the sub folder name is “lib” and
the folder name is “user”: user\lib.
A destination confirmation screen appears.