Ricoh H5676 - Manual (Page 74)

Sending Scan Files by Scan to Folder
66
2
J
The destination is displayed. Check the destination is correct, and then press
{OK}.
Note
❒ If you change the protocol after entering the path name, user name, or pass-
word, a confirmation message appears.
❒ Only folders that you have the read privileges for are displayed.
❒ If the language used for the NDS tree or by the NetWare server differs from
that used by the machine, file names in the NDS tree or on the NetWare
server might appear garbled.
❒ If the selected NDS tree or NetWare server requires authentication, a login
screen appears. Enter a user name and password for logging on to the NDS
tree or NetWare server. If you log on to the NDS tree, enter a user name,
and then enter the name of the context containing the user object. If the
user name is “user” and the name of the Context is “context”, the user
name will be “user.context”.
❒ The machine may fail to transfer the file if you do not have write privileges
for the folder or there is not enough free hard disk space.
❒ You can register the destination path in the machine’s address book. For
details, see “Registering Manually-Entered E-mail Address to Address
Book”.
Reference
p.26 “Registering Manually-Entered E-mail Address to Address Book”