Getting started, Preferred surround placement, Advanced setting alternative surround placement – RCA UND RECEIVER RTD250 User Manual

Page 11

Advertising
background image

Getting Started

Preferred surround placement

Location

If possible, place surround speakers to either side of the lis-
tening area, not behind it.

Height

If space permits, install surrounds 2-3 feet above viewers.
This helps to minimize localization effects.

Aiming

Aiming surrounds straight across the room, not down at
viewers, helps create a more open, spacious surround sound
field.

Advanced Setting
Alternative Surround Placement

Rear wall

If rear wall mounting is the only choice, aim the speakers at
each other (A), towards the front (B) or even towards the
sidewalls (C, D). Experiment with placement until surround
sounds seem to envelop you, rather than coming from
behind you.

No adjacent walls

Surrounds can go on stands facing each other to approxi-
mate the preferred sidewall mounting (A), or to the sides
or rear of the viewing area aimed upwards. In the latter
case, they can go right on the floor, or preferably, a few
feet off the floor such as on end tables (B).

8

Courtesy Dolby Laboratories

Courtesy Dolby Laboratories

Courtesy Dolby Laboratories

Courtesy Dolby Laboratories

Courtesy Dolby Laboratories

RTD250-EN receiver 10/30/03 10:08 AM Page 12

Advertising
This manual is related to the following products: