RCA UND RECEIVER RTD250 - Manual (Page 24)

DVD Player
EN
21
Selecting a title
1. Refer to the previous page “General use” to open the
title menu.
2. Enter a title number using the number keys on the
remote control. Add 0 in front of single-digit title number
(e.g. 9 = 09). You can also use UP/ DOWN key to change the
title number.
Selecting a chapter
1. Refer to the previous page “General use” to open the
title menu.
2. Enter a chapter number using the number keys on the
remote control. Add 0 in front of single-digit chapter
number (e.g. 9 = 09). You can also use UP/ DOWN key to
change the chapter number.
Selecting audio language
1. Refer to the previous page “General use” to open the
subtitle menu, or press AUDIO on the remote control to
select the audio channel.
2. Press the UP/DOWN key to select the audio channel you
want, then press OK to confirm.
Selecting subtitle language
1. Refer to the previous page “General use” to open the
subtitle menu.
2. Press the UP or DOWN key to select the subtitle you
want, then press OK to confirm.
NoteL To exit the OSD banner, press the INFO key.
NOTE
Some discs have one title only.
NOTE
The chapter feature will not work if the disc is not
formatted with separate chapters.
NOTE
This feature only works if the disc was created with
multiple audio tracks.
NOTE
This feature only works if the disc was created with
subtitles.
RTD250-EN DVD 10/30/03 10:17 AM Page 3