Troubleshooting tips, Subtitle, language, camera angle etc, Radio – RCA UND RECEIVER RTD250 User Manual

Page 44: Equipment specifications

Advertising
background image

EN

41

Troubleshooting Tips

Subtitle, language, camera angle etc.

Disc menu operation and contents may differ from disc to
disc. Please refer to the instructions accompanying the disc.

There are no subtitles ?

• check that subtitles are supposed to exist on that disc.
• Subtitles disappear from the TV screen. See page 21 to
display subtitles.

Subtitle (or language) setting cannot be changed ?

• The disc being played has been recorded in only one
language.
• Depending on the type of DVD, some segments limit
language selection.

The picture is not displayed in the correct format on the
TV (4 x 3 or 16 x 9)

• According to your TV, make the correct "TV Screen"
setting in the set-up menu (page 29).

The camera angle cannot be changed with the angle
button ?

• This function does not work when a DVD has not been
recorded with a multi-camera angle system. Some DVDs use
a multi-camera angle system only in certain portions of the
DVD.

The menu language is not the one you want ?

• The menu language for your player has not been set dur-
ing set-up.
• Your preferred menu language on a DVD disc (if
available) has not been set during set up.

Audio (spoken) and / or subtitle language is not the one
selected during the initial player set-up ?

• If the audio or subtitle language is not available on the
DVD disc, the language selected during initial player set-up
will not be heard or seen. The disc's priority language
(default language) is selected automatically. If you want
another language, press menu during playback, if the disc
has its own language selection menu (Refer to page 21).

Radio

STEREO indicator is off.

• Adjust the antenna.

The signal is Mono. Severe hum or noise.

• The signal is too weak. Connect an external antenna.

Equipment Specifications:

AMPLIFIER SECTION:

Stereo mode: each 60W at 6 ohm. 10% THD @1 kHz
Subwoofer channel: 120w at 12Ω
Muting Attenuation: >65dB
Frequency Response: 20Hz to 20kHz +/-1dB
Signal to Noise Ratio: 65dB (Bypass mode)

VIDEO SECTION:

Input ( Sensitivity/ Impedance ):1Vp-p/ 75ohm
Output (Level/ Impedance): 1Vp-p/ 75 ohm
Frequency Response: 10Hz to 6MHz at +/- 3dB
Signal to noise ratio:

40dB

Crosstalk @3.58MHz:

40dB

AM TUNER SECTION:

Frequency Response: 80Hz – 2kHz +/-6dB
Usable Sensitivity: 5000uV/m @ S/N 20dB
Signal to Noise: 30dB
Image Ratio: 20dB @ 1000kHz
IF Rejection: 35dB

FM TUNER SECTION:

Frequency Response: 40Hz – 15kHz +/-3dB
Quieting: 24dBu
Signal to Noise: 60dB(stereo) / 65dB(mono)
Image Ratio: 40dB
IF Rejection: 50dB

JPEG CD SECTION:

Supported format - JPEG

Dimensions (H x W x D inch) :

Unit - 4.4 x 17 x 15.7
Front speaker - 7.8 x 4.6 x 5.5
Rear speaker - - 6.5 x 3.5 x 4.2
Center speaker - - 4.5 x 9.5 x 4.7
Subwoofer - 14 x 7.7 x 13.8

RTD250-EN last 11/11/03 9:47 AM Page 3

Advertising
This manual is related to the following products: