RCA UND RECEIVER RTD250 - Manual (Page 37)

CD / mp3 Player
34
Program playback
Edit program
1. In STOP mode, press PROGRAM on the main unit or
enter the OSD banner to display the edit playlist (program
screen)
2. The box under “TRACK” will be highlighted. Press the
UP or DOWN arrow or number buttons to select a track.
Press OK.
3. “Add” will be highlighted automatically after track is
selected. Press OK to add the selected track to the playlist
4. Repeat steps 2 and 3 to add additional tracks to the pro-
gram.
5. Move to highlight “Play” (start program playback) or
“Done” (return to normal playback with program saved)
and then press OK to confirm program playback or return
to the stop mode.
Delete Program
1. In stop mode, press PROGRAM on the main unit or
enter the OSD banner to display the edit playlist (program
screen)
2. Use the LEFT or RIGHT arrow to select Playlist, then use
the UP or DOWN arrow to select and highlight the
programmed track you want to delete from the playlist.
3. Use the arrow buttons to highlight “Delete” and then
press OK to delete a track.
4. Highlight “Play” (to start program playback) or “Done”
(to return to normal playback with program saved) and
then press OK.
Insert track
1. In stop mode, press and hold PROGRAM. on the main
unit or enter the OSD banner to display program edit
playlist.
2. Use the arrows to highlight on the playlist the item
before which you want to insert a track.
3. Refer to “Edit program” to select a track to be inserted.
4. Highlight “Insert” and then press OK
5. Highlight “Play” (start program playback) or “Done”
(return to normal playback with program saved) and then
press OK.
Cancel program
Program will be cancelled when;
1. the disc tray is opened;
2. power is turned off;
3. STOP is pressed twice. The PROG indicator will disappear
from the display, and the player will resume normal play-
back.
NOTE
You can select a maximum of 32 items
RTD250-EN CD_MP3 5/22/03 11:12 AM Page 6