RCA UND RECEIVER RTD250 - Manual (Page 35)

CD / mp3 Player
32
On- screen banner display for CD playback
General use
1. Press INFO on the remote control to hide and show
the on- screen banner. (Only audio CD banner)
2. Use the LEFT / RIGHT arrow keys to move the cursor on
the banner. The selected feature icon will be highlighted.
3. Press OK to open menu under the selected feature.
Selecting a track
1. Refer to “General use” to open the track
menu.
2. Enter a track number. Start any single-digit track num-
ber by a 0 (e.g. 9 = 09).
Playmode selection for CD
There are several options for this feature.
1. Normal – normal CD playback
2. Program – plays the programmed tracks (usable in stop
mode only)
3. Repeat Disc – repeatedly plays the selected or currently
playing disc.
4. Repeat Track – plays one track over repeatedly.
5. Repeat All Disc– plays all discs in the tray repeatedly.
(only workable when at least one of the discs is audio CD.)
6. Random – randomly plays all the tracks of that disc.
7. Random All Disc – randomly plays all discs in the tray
repeatedly. (works only if at least one of the discs is an
audio CD.)
8. Repeat A-B – repeatedly plays the selected time frame.
Program
Program edit - can be activated in STOP mode only.
Program play - can be activated during playback mode if
there is a saved program in the program list.
NOTE
You must be in playback mode for track selection.
Track
Bookmark
Playmodes Disc type
Time indicator Time display mode
RTD250-EN CD_MP3 5/22/03 11:11 AM Page 4