RCA UND RECEIVER RTD250 - Manual (Page 13)

Operating Your Receiver
BAND/APP REPEAT RANDOM PROGRAM DISPLAY TEST BASS/TRE
PHONES
OPEN/CLOSE DISC SKIP PROGRESSIVE SCAN SOUND MODE SOURCE
VOLUME
ON/STANDBY
5 D V D / C D C H A N G E R
DIGITAL SURROUND RECEIVER RTD250
PROG.
SCAN
Receiver Controls
1. ON / STANDBY
• To turn the unit on/ off. When the system is turned on, the
unit will go to ECO mode (red light will be on), then press the
ON/STANBY button to power the unit up in the last mode used.
2. Source Button
• To select input source. For example, DVD/CD, VCR, etc.
3. < SOUND MODE >
• Press to select the surround sound setting or Digital Sound
Processor (DSP) mode you want. Refer to “Advanced Sound
Control” on page 16.)
4. PRESET - / SKIP REVERSE
• To move back to the beginning/previous preset memory
location in tuner mode.
• To skip to the beginning/previous track in CD mode and the
beginning/previous chapter in DVD mode (only while playing).
5. PRESET + / SKIP FORWARD
• To go to the next preset memory location in tuner mode.
• To skip to the next track in CD mode and the next chapter in
DVD mode (only while playing).
6. BAND / APP
• In Tuner mode, press to select between radio BANDS or press
and hold to enter AUTO PROGRAM mode.
7. RANDOM
• In DVD/CD mode, press to activate Random function.
8. BASS / TRE (PROG. SCAN)
• To adjust BASS / TREBLE, press this button once to choose
either bass or treble, then press preset + and preset - to adjust
level. (Bass/ treble adjustment is not allowed for DTS source)
• 1. Press and hold to activate progressive scan.
2. Press to toggle between on/off within 3 seconds.
3. Release to validate.
9. OPEN / CLOSE
• Press to open / close the CD door. (You may replace all non-
playing discs during playback.)
10. DISC SKIP
• Press to skip to the next disc in the tray.
11. VOLUME
Turn the knob to adjust volume level.
12. PLAY/PAUSE
To play and pause DVD/CD playback.
13. STOP
To stop DVD/CD playback.
14. REPEAT
• Press to toggle on the repeat function in DVD/CD playback.
• In CD mode : refer to CD / mp3 player section.
• In DVD mode: refer to DVD player section.
15. PROGRAM
• Press to toggle on the program function in DVD/CD playback.
• In CD mode : refer to CD / mp3 player section.
• In DVD mode: refer to DVD player section.
16. PHONES
Plug your headphones (not supplied) into it for your private
enjoyment. Speakers will be off when phones are inserted.
17. BLUE LED
• When progressive scan is turned on, the blue light will be on.
• When in protection mode, the blue led will blink continuous-
ly,
18. DISPLAY
• Press to toggle among track elasped time / track remain time /
disc elasped / disc remain time (Audio CD only)
19. TEST (DVD/CD mode only)
• Press STOP if the set is playing.
• Press TEST to enable test tone function for adjustment of
speaker level individually.
• Press LEFT/RIGHT key on remote to decrease / increase the
level of channel which is showing on the VFD until you can get
the correct level from the corresponding channel.
• Press PLAY to quit setting and playback or press STOP to quit
only.
1
6
2 4
14
13 12
9
11 7
5
8
10
10
3
15 16
17
18 19
RTD250-EN receiver 10/30/03 10:08 AM Page 14