Rimage 480i - Manual (Page 12)

Rimage® 480i Printer User Guide
Printer Control Panel
The Rimage 480i printer control panel has three buttons and three lights to indicate certain conditions. The table
below explains each of these buttons and indicator lights.
Image Name Functionality
Cancel/
Ink Cartridge Status
When you press the Cancel button, it provides limited
functionality to cancel printing.
The Cancel/Ink Cartridge Status indicator light
flashes amber when there is a hardware issue.
The Cancel/Ink Cartridge Status indicator light is solid
amber when an ink cartridge is low on ink.
Tray When you press the Tray button, the Tray indicator
light illuminates briefly and the printer tray moves in
or out. This functionality is used to move the printer
tray in and out, to load a disc for manual printing, or
to check the alignment.
The Tray indicator light flashes when there is a tray
movement error.
Power When you press the Power button with the printer
powered on, the printer goes into sleep mode. When
you press the Power button again, the printer returns
to the ready state.
The Power indicator light is solid green when the
printer is powered on and ready.
When the printer is powered off or in sleep mode, the
Power indicator light is not illuminated.
The Power indicator light flashes when the printer is
printing or in an error state.
Tip: Connect the AC power adaptor to the side
of the printer to power on the printer. Refer to the
Power On or Off the Rimage 480i printer section
on page 11.
8 110761_D