Rimage 480i - Manual (Page 22)

Rimage® 480i Printer User Guide
y
If you use hub-printable discs without a stacking ring:
a. Measure the inner diameter of the printable surface.
Disc without a stacking ring
Tip: Most discs like the one shown above have the following printable areas:
y
Outer Diameter 118 mm
y Inner Diameter 24 mm.
b. In the Standard Area Settings field, change the Outer Diameter and Inner Diameter settings
to the value measured in step a.
4. Select OK. The Preferences window closes.
Align the Ink Cartridges
For optimal print quality and maximum printing speed, use this procedure to align the ink cartridges.
1. Navigate to Printing Preferences . Refer to page 14.
2. Load a disc in the printer.
a. Press . The printer tray opens.
b. Place one 120 mm white disc on the tray.
3. Check the ink cartridge alignment.
a. From the Preferences window, select the Service tab.
b. Select Service ToolBox. The Service ToolBox dialog box opens.
c. Select Align Cartridges. The Align Cartridges for Disc Color Printer 480i dialog box opens.
d. Follow the onscreen prompts to complete the alignment.
e. When the alignment is complete, select OK. The Align Cartridges for Disc Color Printer 480i dialog box
closes.
5. Select OK. The Preferences window closes.
6. Press . The printer tray closes.
18 110761_D