Rimage 480i User Manual
Page 28
Rimage® 480i Printer User Guide
24
110761_D
9. Close
the ink cartridge access door. The ink cartridge status light flashes for a few seconds and
then stops. The Rimage 480i printer is ready to print.
Note: If the ink cartridge is not securely seated in the cradle, the printer will not recognize the ink
cartridge. The printer may not reset properly, or you may receive an “invalid ink cartridge”
message. If this happens:
y
Remove the ink cartridge and reinsert it. Make sure to press firmly when you reinsert it.
y
Make sure to use the appropriate cartridge. Acceptable cartridges are listed in the Ink
Requirements section on page 5.
y
If the problem persists, replace the ink cartridge.
10. Align the ink cartridges. Refer to the Align the Ink Cartridges section on page 18.