Rimage 480i - Manual (Page 26)

Rimage® 480i Printer User Guide
Remove Dust from the Rimage 480i Printer
#
Required tools:
Can of compressed air
1. Open the cable access door and disconnect the AC power adaptor to power off the Rimage 480i printer.
2. Disconnect the USB cable from the side of the printer.
3. Remove the dust.
a. Open the ink cartridge access door. The ink
cartridge carriage moves to an accessible
position on the carriage guide.
b. When the ink cartridge carriage stops, spray
the compressed air through the printer from
front to back.
c. Close the ink cartridge access door.
d. Press the tab and open the printer service
door.
e. Spray the compressed air from the hinges of
the printer service door to the back of the
printer.
f. Close the printer service door.
4. Connect the USB cable to the printer.
5. Connect the AC power adaptor to power on the printer.
Air Flow
Air Flow
Ink
Printer
Service
Door
Cartridge
Access
Door
22 110761_D