Rimage 480i - Manual (Page 15)

Operate the Rimage 480i Printer
Operate the Rimage 480i Printer
This section provides the information that you need to operate your Rimage 480i printer.
Access the Power and USB
Cables
You will need to open the cable access door to power on
and off the 480i printer, as well as to perform regular
maintenance on the printer.
Tip: Refer to page 20 for the 480i printer Preventative
Maintenance Schedule.
Remove the cable access door on the side of the printer
to access the connections for the AC power adaptor and
the USB cable.
Power On or Off the Rimage
480i Printer
Connect the AC power adaptor to the Rimage 480i
printer. Refer to the
Side View section on page 7. The 480i
printer powers on.

Notes:
• The power indicator light illuminates when the
printer is powered on and ready.
• Press the Power button to put the printer into
sleep mode. The Power indicator light turns off.
• Press the Power button again or send a print job
to the printer to bring the printer out of sleep
mode.
Disconnect the AC power adaptor. The Rimage 480i
printer powers off.
Control Panel
Cable
Access
Door
Power
Button
Power
Indicator
Light
110761_D 11