Radio Shack 15-2107 - Manual (Page 32)

32
Preparation
Programming Home Theater Macros
The Home Theater mode also includes three exclusive
macro keys (
SET 1 , SET 2 , and SET 3 ). You can store up
to 15 keystrokes (including learned keys) on each macro
key. For example, you can create a macro that powers
on each device in your home theater system with the
convenience of a single key touch.
Note: Macros can include learned keys, but not moved
keys.
1. Turn off all home entertainment devices.
2. Hold down P for at least 3 seconds.
9E:;ý I;J 9E:;ý I;J 9E:;ý I;J 9E:;ý I;J
appears.
3. Touch the down arrow four times.
C79HEý A;O C79HEý A;O C79HEý A;O C79HEý A;O
appears.
Note: If you scroll past
C79HEý A;O C79HEý A;O C79HEý A;O C79HEý A;O
, touch the up
arrow to return to it.
4. Touch SELECT .
I;BýC79HE I;BýC79HE I;BýC79HE I;BýC79HE
appears.
5. Press a macro key ( SET 1 , SET 2 , or SET 3 ).
;DJ ;DJ ;DJ ;DJ
C79HE C79HE C79HE C79HE
appears. For the example, press SET 1 .
Note: Pressing a previously-programmed macro
key will overwrite its contents.
6. Press the appropriate keys in the desired order.
For the example, entering the following keys in the
below order to program
SET 1 to turn on the TV and
cable box, then tune the cable to channel 061.
Touch TV .
I;BýJEý;D: I;BýJEý;D: I;BýJEý;D: I;BýJEý;D:
appears.
Note:
I;Bý JEý ;D: I;Bý JEý ;D: I;Bý JEý ;D: I;Bý JEý ;D:
prompts you to press SELECT
when you reach the end of the macro sequence you
are entering.
Press POWER to turn on the TV.
Touch CAB/SAT to select the cable box.
Press POWER to turn on the cable box.