Radio Shack 15-2107 - Manual (Page 38)

38
Operation
USING HOME THEATER
1. Touch MODE SHIFT one or more times until the THE-
ATER key appears.
2. Touch THEATER . Your custom set of Home Theater
remote control keys appear.
3. Use the keys as usual. The keys operate only the
devices you assigned them to. For example, if you
assigned the playback keys to your VCR, any time
you press
PLAY (or any other key from the menu
controls) the VCR plays. PLAY no longer operates
your DVD or other devices.
4. To exit Home Theater mode, press the device key
(for example, VCR/DVD ) of the desired mode. If nec-
essary, touch the MODE SHIFT key repeatedly to dis-
play other device choices.
USING A TIMED MACRO SEQUENCE
To use a Timed Macro Sequence, place the remote con-
trol so it faces the device used in the macro. In the ex-
ample, aim the remote control at the VCR.
At the appropriate time, the macro sequence will auto-
matically run to turn on the VCR, record the show, and
then turn off the VCR.
USING VOLUME LOCK
Your remote control‘s Volume Lock is preset to unlock.
Pressing the volume and mute keys directly controls the
volume of the currently-selected device. If you change to
another mode, the volume controls automatically trans-
fer to the newly-selected device.
However, you may want to lock the volume controls to
one or more modes. For example, you can lock the vol-
ume controls to the TV mode. This way, TV volume is al-
ways controllable no matter what mode is selected.