Step 2: check locations, 1 identify suitable locations, Course computer location – Raymarine 150/400 User Manual
Page 14: Compass location, Check locations
6
Type 150/400 Autopilot System: Installation Guide
St
e
p
Step 2:
Check Locations
2.1 Identify suitable locations
After reading the following EMC installation guidelines (see page 7),
identify suitable locations for each part of the system.
Course computer location:
•
mount vertically on a flat bulkhead below decks
•
dry, protected and well-ventilated
•
free from high operating temperatures and excessive vibration
Compass location:
•
mount vertically, with cable exiting at the base
•
as near as possible to the boat’s pitch and roll center
•
at least 0.8 m (2 ft 6 in) away from the boat’s steering compass
•
in the back two-thirds of the boat
•
away from potential sources of magnetic interference
Í
For more information, see page 10
Í
For more information, see page 18
D5378-1
Typical locations
81173_3.book Page 6 Thursday, June 7, 2001 11:51 AM