3 connecting optional components, Gyroplus yaw sensor, Handheld remotes – Raymarine 150/400 User Manual

Page 48: External alarm, Wind vane (sail boats), Connecting optional components

Advertising
background image

40

Type 150/400 Autopilot System: Installation Guide

Ste

p

9

9.3 Connecting optional components

GyroPlus yaw sensor

The Type 150 and Type 400 course computers do not contain a
built-in GyroPlus, but you have the option of adding:

an external GyroPlus (part number: M81162)

or a dealer-fitted internal GyroPlus (part number: A18069)

Handheld remotes

You can connect handheld remotes to the autopilot system:

the ST600R remote control unit (part number: A12016) can act
as the sole pilot control unit in your system or as a full-function
remote for systems with other fixed pilot control units

the compact SeaTalk handheld remote (part number: A15002)
gives you full course control away from the main steering
position

External alarm

The autopilot system sounds an off-course alarm from all control
units. On large and/or noisy boats you can fit a Raymarine external
alarm (part number: Z035, connected though E85001 interface box)
as a high volume repeater.

Wind vane (sail boats)

The course computer can use wind angle information from a wind
vane or instrument to maintain a course relative to the wind. You can
provide wind angle information to the autopilot system by connecting
it to:

a suitable SeaTalk or NMEA instrument (providing wind angle
and speed information)
or

a Raymarine pushpit wind vane (part number: Z159) connected
through an interface box (part number: M81189)

Í

To install any of these options, refer to the information supplied with the
component.

81173_3.book Page 40 Thursday, June 7, 2001 11:51 AM

Advertising