User parameters, Setting? y/h print list h – Ricoh FAX1400L User Manual
Page 49
Using Key Operator Settings
37
7
User Parameters
Adjusting your machine sometimes requires that you change special settings
called user parameters. For each user parameter, you must change a bit in a
switch.
A switch has eight bits. Each bit has a value of 1 or 0, and each bit is numbered
0 to 7 from the right.
❖
❖
❖
❖ Bit values and Bit numbers
In the following example we will change bit 3 of switch 05 in the user parame-
ters.
A
Press
{{{{Function}}}} {{{{6}}}} and enter the access code {{{{2}}}} {{{{2}}}} {{{{2}}}} {{{{2}}}}. Press {{{{6}}}} {{{{3}}}},
and then the
{{{{Yes}}}} key.
You will get this display.
SETTING? Y/h
PRINT LIST h
Note
❒ You can press the W key to see a list. Otherwise, press the {Yes} key.
B
Press the
{{{{Yes}}}} key again and use W
W
W
W and V
V
V
V to change switches.
Note
❒ For example go to switch 05 by pressing V five times.
KPAD/Y/hi
SWITCH 05 :0000 0011
C
To change bit 1, press
{{{{1}}}} on the ten key pad.
Bit 1 will change from 1 to 0 or from 0 to 1.
KPAD/Y/hi
SWITCH 05 :0000 0001
Note
❒ To change bit 0, press {0} to change bit 1, press {1} and so on.
D
Press the
{{{{Yes}}}} and {{{{Function}}}} keys.
Bit number
7
6
5
4
3
2
1
0
↓
↓
↓
↓
↓
↓
↓
↓
Bit value
0
1
0
0
0
0
0
0
Holsten1AE_Advanced_FM.book Page 37 Wednesday, November 8, 2000 11:24 AM