Ricoh FAX1400L - Manual (Page 68)

Installation
56
10
Machine Environment
When choosing a location for your
machine, please follow the safety in-
struction given in the first section.
Location
For the best possible performance, in-
stall your machine in a place which
satisfies the following conditions.
• Not exposed to direct sunlight
• Well ventilated (air turnover at
least three times per hour); to
avoid the build-up of ozone, make
sure to locate the machine in a
large well-ventilated room which
has an air turnover of more than 30
m
3 /hr per person.
• Level
• Not subject to vibration
• Away from other electronic equip-
ment, to avoid interference
• Away from areas containing corro-
sive gas
• Dust-free
• Condensation-free
• Temperature
15
°C to 25°C (Recommended
range)
10
°C to 35°C (Possible operation
range)
• Humidity (do not install near a hu-
midifier)
3 0 % t o 7 0 % ( R e c o m m e n d e d
range)
15% to 80 % (Possible operation
range)
• Away from heaters and air condi-
tioners, to avoid sudden changes
of temperature
• Within 5 meters of a three-pin
grounded power outlet (220-240
Volts, 50/60 Hz)
• With the clearance as shown
R CAUTION:
This machine generates a certain amount of
ozone. Although the amount generated is
within safety requirements, it is recom-
mended that, to avoid ozone buildup, you
install the machine in a room which is prop-
erly ventilated.
Holsten1AE_Advanced_FM.book Page 56 Wednesday, November 8, 2000 11:24 AM