Roland Edirol R-05 - Manual (Page 37)

38
Recording
fig.sousa-1a-e.eps
1. Switch on the R-05’s power (p. 26).
fig.power-onoff-e.eps_60
2. Set the sampling rate (p. 42).
3. Specify the Rec Mode (file type) (p. 42).
4. Press [MENU] twice to return to the main
screen.
5. Adjust the recording level.
Press [ ] to enter recording-standby mode,
and adjust the level of the sound you’re
recording (p. 44).
6. Start recording.
In recording-standby mode (REC indicator
blinking), press [
] or [ ].
The REC indicator will light, and recording will
begin.
By turning on the [HOLD] switch after recording
begins, you can prevent recording from being
stopped or the recording level from being
changed even if buttons are pressed
inadvertently.
• The built-in mics cannot be used if a mic or
other device is connected to the MIC jack or
LINE IN jack. If you want to use the built-in
mics, do not connect anything to the MIC jack
or LINE IN jack.
Basic Recording Operation
Play / Pause
Fast-forward /
Move to next song
Rewind /
Move to previous song
(beginning of song)
Record /
Recording-standby
Stop
On/off
R-05-e.book 38 ページ ２０１０年２月１９日 金曜日 午後４時５５分