Roland Edirol R-05 - Manual (Page 55)

56
Recording
You can split the file during recording.
If you’ve split the file, it will be easy to start playback
from a division point.
When you’re making a continuous recording for an
extended period of time, you may find it desirable to
split the file at points that will be convenient for
searching.
Splitting manually
1. Start recording.
2. Press [SPLIT] at the moment you want to split
the file.
fig.split-2.eps
The file will be split at the point you press the
button.
3. Press [ ] to stop recording.
Splitting automatically
The R-05 can automatically split the file when the
currently recorded file reaches a specified size, or
when the recording level falls below a specified value.
By default, this is set to automatically split the file
when the file size reaches 2 GB.
1. Press [MENU] to access the “Menu” screen,
use [
]/[ ] to choose “Recorder Setup,”
and then press [ ].
fig.recoedersetting.eps_80
2. Use [ ]/[ ] to move the cursor to the
Split Type setting, and use [ ]/[ ] to
choose the file size or the recording level at
which the file is to be automatically split.
fig
Splitting the File During Recording
R-05-e.book 56 ページ ２０１０年２月１９日 金曜日 午後４時５５分