Using the auto rec start function – Roland Edirol R-05 User Manual
Page 50
51
Recording
By using the Auto Rec Start function, you can have
recording start automatically when a specified time
has elapsed, or when the recording level exceeds a
specified value.
1.
Press [MENU] to access the “Menu” screen,
use [
]/[
] to select “Recorder Setup,”
and then press [
].
fig.recoedersetting.eps_80
2.
Use [
]/[
] to move the cursor to the
Auto Rec Start setting, and use [
]/[
]
to specify the time after which recording will
start or the level at which recording will start.
fig
3.
Press [MENU] twice to return to the main
screen.
4.
From the main screen, press [
] so the REC
indicator is blinking. The R-05 will enter
recording-standby mode.
5.
Press [
] once again.
Recording will begin automatically when the
specified time has elapsed or when the specified
recording level is detected.
Using the Auto Rec Start Function
(Default in bold)
Setting
Auto Rec Start is not used
OFF
Time until recording starts
2sec
5sec
10sec
Level at which recording starts
Level1
(-60dB)
Level2
(-30dB)
Level3
(-20dB)
R-05-e.book 51 ページ ２０１０年２月１９日 金曜日 午後４時５５分