Using the pre-rec function, P. 50). two – Roland Edirol R-05 User Manual
Page 49
50
Recording
Setting the frequency at which to cut
1.
Press [MENU] to access the “Menu” screen,
use [
]/[
] to select “Input Setup,” and
press [
].
fig.recoedersetting.eps_80
2.
Use [
]/[
] to move the cursor to the
Low Cut Freq. setting, and use [
]/[
]
to change the setting.
3.
Press [MENU] twice to return to the main
screen.
The R-05 provides a Pre-Rec function that lets you
capture the two seconds of sound that preceded the
moment you press the record button. Even for
situations in which you’re not sure when the desired
sound will begin, such as when recording outdoors,
this function ensures that you can record without
missing the first moments of the sound.
1.
Press [MENU] to access the “Menu” screen,
use [
]/[
] to select “Recorder Setup,”
and then press [
].
fig.recoedersetting.eps_80
2.
Use [
]/[
] to move the cursor to the
Pre-Rec setting, and use [
]/[
] to
choose “ON.”
ig.setsamplingrate.eps_80
(Default in bold)
Setting
100Hz
200Hz
400Hz
Using the Pre-Rec Function
R-05-e.book 50 ページ ２０１０年２月１９日 金曜日 午後４時５５分