Roland Edirol R-05 - Manual (Page 38)

39
Recording
• The recording level will change if you operate
the INPUT [+] [–] buttons in recording-standby
mode or during recording. Take care that you
don’t inadvertently operate the INPUT [+] [–]
buttons.
• You can’t turn off the power during recording.
You must stop recording before you can turn
off the power.
7. Press [ ] to stop recording.
The REC indicator will go out.
The display will show the file that was recorded
(p. 25).
fig.song.eps_80
• To pause, press [ ]. To disengage pause
and resume recording, press [ ] once
again.
• A file name such as R05_0001.WAV will be
created automatically.
The 0001 portion will be the number following
the highest-numbered file that exists.
• If the Recorder Setup parameter File Name is set
to “Date,” the date and time of recording will be
the file name “Settings for the R-05” (p. 89).
8. Press [ ] to play back the recorded file.
“Basic Playback Operation” (p. 63)
R-05-e.book 39 ページ ２０１０年２月１９日 金曜日 午後４時５５分