RCA 605 - Manual (Page 18)

8 E-DOC-CTC-20051017-0151 v1.0
Chapter 1
Getting to know your SpeedTouch™
1.2.2 Access via CLI
To access the
SpeedTouch™ via the
Command Line
Interface (CLI)
You can access the Command Line Interface (CLI) via:
 The embedded Expert pages. For more information, see “5 Expert
Configuration” on page 99 .
 A Telnet session
This requires a TCP/IP connection between the host from which the Telnet
session is opened and the SpeedTouch™. Your SpeedTouch™ and the
connected computer must have an IP address in the same subnet.
 The serial ‘Console’ interface
 Quote site commands (over FTP)
For more information, see “ Quote site command” on page 12 .
For more information on CLI commands, see the SpeedTouch™ CLI Reference
Guide.