Adding igd discovery and control, Client (see, Adding igd discovery and – RCA 605 User Manual
Page 203: Chapter 7
193
E-DOC-CTC-20051017-0151 v1.0
Chapter 7
Troubleshooting
Adding IGD Discovery
and Control
Your Windows XP system is able to discover and control Internet Gateway Devices
(IGD), like the SpeedTouch™ on your local network. Therefore it is recommended to
add the IGD Discovery and Control client to your system.
Proceed as follows:
1
On the Windows taskbar, click Start.
2
Select (Settings >) Control Panel > Add or Remove Programs.
3
In the Add or Remove Programs window, click Add/Remove Windows
Components.
The Windows Components Wizard appears:
4
Select Networking Services in the Components list and click Details.
5
In the Networking Services window, Select Internet Gateway Device
Discovery and Control Client and click OK.
6
Click Next to start the installation and follow the instructions in the Windows
Components Wizard.
7
At the end of the procedure the wizard informs you that the installation was
successful. Click Finish to quit.