Chapter 4 – RCA 605 User Manual

Page 84

Advertising
background image

74

E-DOC-CTC-20051017-0151 v1.0

Chapter 4

Basic Configuration



Select a row using the Edit link to modify the security rule.



Click Add to create a new security rule.

5

Edit or define following parameters of the rule:



The Name of the security rule



The Source Interface and IP Address (range)

Or you can type a User-defined IP address (range).



The Destination Interface and IP Address (range)

Or you can type a User-defined IP address (range).



The Service type of the traffic; this can be a protocol (dns, smtp, ...) or a
specific SpeedTouch™ system service.

6

Select an Action that should be done on traffic for which the security rules
applies:



Accept: to allow the traffic to pass



Deny: to drop the traffic (without notification)



Count: to let the traffic pass, but count it (Hits)

7

Click Apply.

Use Any as IP address in case all traffic for the interface should
be parsed.

Use Any as IP address in case all traffic for the interface should
be parsed.

Advertising
This manual is related to the following products:

608