Raritan Computer Raritan ASMI G4 - Manual (Page 10)

Chapter 1. The Quick Start Guide
About the Raritan ASMI G4 Remote Management Card
Figure 1-1. Front View of the ASMI G4 Module
The ASMI G4 add-on card provides remote server management capabilities. You can use the ASMI G4
add-on card to manage and monitor components in your servers through the WAN/LAN. The ASMI G4
add-on card offers a comprehensive hardware solution for server management.
Connecting the ASMI G4 Module to the Host System
Warning
Please note: the firmware of the ASMI G4 board delivered to you is customized for
use with the specified motherboard model. Do not use with other motherboards.
Connecting the ASMI G4 module to the Host System is easy: turn off the host, find the correct slot and
carefully insert the ASMI G4 module into the slot.
Warning
You should disconnect the host from the power supply completely, including
disconnecting the power supply cable.
Initial Network Configuration
Initially, the ASMI network interface is configured with the parameters shown in Table 1-1 .
1