Raritan Computer Raritan ASMI G4 - Manual (Page 96)

Chapter 6. Menu Options
file and whether there were any transmission errors. In case of any error the Upload Firmware
function will be aborted and the current firmware is left in place. No update will take place.
2. Then, if everything in step 1 went well, you will see the Update Firmware panel. The panel shows
you the version number of the currently running firmware and the version number of the newly
uploaded firmware. Pressing the button "Update" will store the new version and substitute the old
one completely.
Warning
This process is not reversible and might take several minutes. Make sure
the ASMI module’s power supply will not be interrupted during the update
process because this may result in an unusable device.
3. Finally, after the firmware has been stored, the ASMI module will be reset automatically. After
about one minute you will be redirected to the Login page and requested to login once again.
Warning
The three-stage firmware update process and the complete consistency check
make mistakes during the firmware update almost impossible. However, only
experienced staff members or administrators should perform a firmware update.
Make sure the ASMI module’s power supply will not be interrupted!
87