Raritan Computer Raritan ASMI G4 - Manual (Page 51)

Chapter 6. Menu Options
Specify the parameters of the network connection (see Figure 6-7 ).
Device
This is the address (either the DNS name or the IP address) of the ASMI module you would like to
connect to.
Port
This is the network port. By default the ASMI module uses the remote console port (#443) here.
You need to change this value if you have changed the remote console port in your ASMI module’s
network settings.
Secure Connection
Enable this box to establish a secure connection via SSL. This will maximize security but may
reduce the connection speed.
Drive Selection
Figure 6-8. Selecting the desired drive
42