Raritan Computer Raritan ASMI G4 - Manual (Page 11)

Chapter 1. The Quick Start Guide
Table 1-1. Initial Network Configuration
Parameter Value
IP auto configuration DHCP
IP address -
Netmask -
Gateway -
Warning
If the DHCP connection fails on boot up, the ASMI module will not have an IP
address and will not function on the network.
If this initial configuration does not meet your local requirements, adjust the values to your needs. To
retrieve the IP address of the ASMI add-on card, you could look into the records on the DHCP server.
There are special tools provided by us to ease the configuration and setup of the ASMI board. One of
these tools is called psetup. This tool will automatically seek out ASMI devices on your local subnet and
allow you to set them up.
Web Interface
The ASMI add-on card may be accessed using a standard Java enabled web browser. You may use the
HTTP protocol or a secure encrypted connection via HTTPS. Just enter the configured IP address of the
ASMI add-on card into your web browser.
The initial login settings for the web interface are as follows:
Table 1-2. Login Settings
User Password
super pass
The Remote Console
The Remote Console is the redirected screen, keyboard and mouse of the remote host system in which
the ASMI is installed. The web browser which is used for accessing the ASMI module has to supply a
Java Runtime Environment version 1.4 or higher.
Note: You can get things working with lower numbered versions of the JAVA Environment, but we
cannot guarantee that all features will be available.
2