Raymarine Ray215e - Manual (Page 41)

3-18 Operation with Minimum Function Handset
4. Press the DSC/PRI key once to accept. The small character display
now shows a “2”, designating the second digit in your MMSI number.
5. Rotate the Channel Select (CH) knob until the second digit of your
MMSI number appears in the large channel display.
6. Press the DSC/PRI key once to accept.
7. Enter all 9 digits of the MMSI number in the same way.
Once the 9th digit has been entered and accepted, the RAY215E plays
back the 9 digits (one digit at a time) to verify proper entry.
Note: Ensure the MMSI number entered is correct with this verification
playback. Once the number is accepted as outlined in the next step, it
cannot be changed except by Raymarine factory representatives.
8. If the number is verified as correct, press and hold the DSC/PRI key
for 2 seconds and a tone sounds. Your MMSI number has now been
stored in memory.
If the number is incorrect, press the DSC/PRI key once and release.
The radio will revert to the beginning of the entry process to start over
again. This step can be repeated as many times as required until the
number is entered correctly.
ROTATE
CH
PRESS & REL
DSC
PRESS & REL
DSC
PRESS & HOLD
DSC
MMSI digit digit position
Select desired digit Next digit position Select desired digit
Continue thru last digit position Radio replays all digits...
MMSI number accepted
PRESS & REL
DSC
Returns to working channel
...through the 9th position
Returns to first digit position
ROTATE
CH
Select desired digit
ROTATE
CH PRESS & REL
DSC
PRESS & HOLD
DSC + D/L PRESS & REL
SCAN